Поиск

Полнотекстовый поиск:
Где искать:
везде
только в названии
только в тексте
Выводить:
описание
слова в тексте
только заголовок

Рекомендуем ознакомиться

Остальные работы->Реферат
What is it that makes us who we are? This is a question that has been asked by many people countless times. The debate Nature Vs Nurture has been a lo...полностью>>
Остальные работы->Реферат
Philosophy is a general overview of how our society functions, by how we think and the many ways in which we act. It can also be described as the love...полностью>>
Остальные работы->Реферат
Costa Rica, a country of Central America, covers an area of 19,730 square miles. The capital is San Jos?. Extending from northwest to southeast, Costa...полностью>>
Остальные работы->Реферат
The period, in which the United States began to rebuild and unify the Union from 1865 to 1877, was known as Reconstruction. Much of the early work of ...полностью>>

Главная > Реферат >Остальные работы

Сохрани ссылку в одной из сетей:

The Giver Essay, Research Paper

Solution

Description:

How to install another video card (includes disabling the on-board

video)? PCV 70 90

Solution:

This solution is broken into three sections:

I. IMPORTANT NOTES (READ FIRST)

II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)

III. DISABLE ON-BOARD VIDEO

Please read the information below carefully.

I. IMPORTANT NOTES:

1. It is your responsibility to install and setup the new video card.

2. If the operating system does not have the appropriate video drivers

for your new video card you will have to contact the maker of the video

card for operating system compatible drivers.

II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)

BEFORE installing the video card, check your BIOS version and upgrade to

the latest BIOS version if applicable.

1. Click Start, point to Programs, point to MEDI-Kit and click MEDI-Kit

Interface.

2. Under DMI Compliant Component, click Intel PC System Description.

3. Click the System BIOS tab.

4. Check next to version for the BIOS version. The BIOS version will

look like 1.00.XX.DD04. The XX is the version number. Hence, if the

version is listed as 1.00.04.DD04, then the BIOS is version 04.

NOTE: As of 2/16/99, the latest BIOS update for PCV 70 90 is version

10.

5. Go the Sony web site at:

http://www.ita.sel.sony.com/support/pc/

6. Click Software Updates.

7. Read and accept the License Agreement.

8. Click the link for PCV 70, PCV 90.

9. Scroll through the entries for BIOS Updates. Download the BIOS

update if it is newer than the one currently installed on your system.

10. Follow the instructions in the accompanying text file to download

and install the BIOS update.

III. DISABLE ON-BOARD VIDEO

Follow the instructions below to disable the on-board video. Steps are

available for both Windows 95 and Windows 98.

Windows 95:

1. Click Start, point to Settings, and click Control Panel.

2. Double-click the System icon.

3. Click the Device Manager tab.

4. Double-click the Display Adapters entry.

5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).

6. Click the Properties button.

7. Click to remove the checkmark from Original Configuration (Current).

8. Click OK to accept the change.

9. Click NO to NOT restart the system.

10. Follow the subprocedure below to change the video display to

Standard Display Adapter (VGA).

Subprocedure:

A. Click Start, point to Settings, and click Control Panel.

B. Double-click the Display icon.

C. Click the Settings tab.

D. Click the Change Display Type button.

E. Next to Adapter type, click the Change button.

F. Click to select Show All Devices.

G. At the top left, click to highlight Standard Display Types.

H. At the top right, click to highlight Standard Display Adapter (VGA).

I. At the Select Device box, click the OK button.

J. At the Change Display type box, click the Close button.

K. At the Display Properties box, click Close.

L. Click Yes to restart the system. let the system boot back up.

Continue to step 11.

11. Click Start, and click Shutdown.

12. Select Shutdown and click Yes.

13. Once the system is shutdown, unplug it. The new video graphics

card may now be physically installed.

The following instructions should be used to disable the ATI graphics

chip set models PCV 70 90 with Windows 98.

Windows 98:

1. Click Start, point to Settings, and click Control Panel.

2. Double-click the System icon.

3. Click the Device Manager tab.

4. Double-click the Display Adapters entry.

5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).

6. Click the Properties button.

7. Click the Settings tab.

8. Click the Factory Defaults button.

9. At Factory Defaults window, click OK.

10. At the Factory Defaults have been restored to defaults message,

click OK.

11. At the ATI mach64 PCI (macxw4) (DirectDraw) box, click OK.

12. At the System Settings Change prompt, click NO to NOT restart.

13. Follow the subprocedure below to change the video display to

Standard Display Adapter (VGA).

Subprocedure:

A. Click Start, point to Settings, and click Control Panel.

B. Double-click the Display icon.

C. Click the Settings tab.

D. Click the Change Display Type button.

E. Next to Adapter type, click the Change button.

F. Click to select Show All Devices.

G. At the top left, click to highlight Standard Display Types.

H. At the top right, click to highlight Standard Display Adapter (VGA).

I. At the Select Device box, click the OK button.

J. At the Change Display type box, click the Close button.

K. At the Display Properties box, click Close.

L. Click Yes to restart the system. Let the system boot back up.

Continue to step 14.

14. Click Start and click Shutdown.

15. Select Shutdown and click Yes.

16. Once the system is shutdown, unplug it. The new video graphics

card may now be physically installed.

Solution

Description:

How to install another video card (includes disabling the on-board

video)? PCV 70 90

Solution:

This solution is broken into three sections:

I. IMPORTANT NOTES (READ FIRST)

II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)

III. DISABLE ON-BOARD VIDEO

Please read the information below carefully.

I. IMPORTANT NOTES:

1. It is your responsibility to install and setup the new video card.

2. If the operating system does not have the appropriate video drivers

for your new video card you will have to contact the maker of the video

card for operating system compatible drivers.

II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)

BEFORE installing the video card, check your BIOS version and upgrade to

the latest BIOS version if applicable.

1. Click Start, point to Programs, point to MEDI-Kit and click MEDI-Kit

Interface.

2. Under DMI Compliant Component, click Intel PC System Description.

3. Click the System BIOS tab.

4. Check next to version for the BIOS version. The BIOS version will

look like 1.00.XX.DD04. The XX is the version number. Hence, if the

version is listed as 1.00.04.DD04, then the BIOS is version 04.

NOTE: As of 2/16/99, the latest BIOS update for PCV 70 90 is version

10.

5. Go the Sony web site at:

http://www.ita.sel.sony.com/support/pc/

6. Click Software Updates.

7. Read and accept the License Agreement.

8. Click the link for PCV 70, PCV 90.

9. Scroll through the entries for BIOS Updates. Download the BIOS

update if it is newer than the one currently installed on your system.

10. Follow the instructions in the accompanying text file to download

and install the BIOS update.

III. DISABLE ON-BOARD VIDEO

Follow the instructions below to disable the on-board video. Steps are

available for both Windows 95 and Windows 98.

Windows 95:

1. Click Start, point to Settings, and click Control Panel.

2. Double-click the System icon.

3. Click the Device Manager tab.

4. Double-click the Display Adapters entry.

5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).

6. Click the Properties button.

7. Click to remove the checkmark from Original Configuration (Current).

8. Click OK to accept the change.

9. Click NO to NOT restart the system.

10. Follow the subprocedure below to change the video display to

Standard Display Adapter (VGA).

Subprocedure:

A. Click Start, point to Settings, and click Control Panel.

B. Double-click the Display icon.

C. Click the Settings tab.

D. Click the Change Display Type button.

E. Next to Adapter type, click the Change button.

F. Click to select Show All Devices.

G. At the top left, click to highlight Standard Display Types.

H. At the top right, click to highlight Standard Display Adapter (VGA).

I. At the Select Device box, click the OK button.

J. At the Change Display type box, click the Close button.

K. At the Display Properties box, click Close.

L. Click Yes to restart the system. let the system boot back up.

Continue to step 11.

11. Click Start, and click Shutdown.

12. Select Shutdown and click Yes.

13. Once the system is shutdown, unplug it. The new video graphics

card may now be physically installed.

The following instructions should be used to disable the ATI graphics

chip set models PCV 70 90 with Windows 98.

Windows 98:

1. Click Start, point to Settings, and click Control Panel.

2. Double-click the System icon.

3. Click the Device Manager tab.

4. Double-click the Display Adapters entry.

5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).

6. Click the Properties button.

7. Click the Settings tab.

8. Click the Factory Defaults button.

9. At Factory Defaults window, click OK.

10. At the Factory Defaults have been restored to defaults message,

click OK.

11. At the ATI mach64 PCI (macxw4) (DirectDraw) box, click OK.

12. At the System Settings Change prompt, click NO to NOT restart.

13. Follow the subprocedure below to change the video display to

Standard Display Adapter (VGA).

Subprocedure:

A. Click Start, point to Settings, and click Control Panel.

B. Double-click the Display icon.

C. Click the Settings tab.

D. Click the Change Display Type button.

E. Next to Adapter type, click the Change button.

F. Click to select Show All Devices.

G. At the top left, click to highlight Standard Display Types.

H. At the top right, click to highlight Standard Display Adapter (VGA).

I. At the Select Device box, click the OK button.

J. At the Change Display type box, click the Close button.

K. At the Display Properties box, click Close.

L. Click Yes to restart the system. Let the system boot back up.

Continue to step 14.

14. Click Start and click Shutdown.

15. Select Shutdown and click Yes.

16. Once the system is shutdown, unplug it. The new video graphics

card may now be physically installed.

Solution

Description:

How to install another video card (includes disabling the on-board

video)? PCV 70 90

Solution:

This solution is broken into three sections:

I. IMPORTANT NOTES (READ FIRST)

II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)

III. DISABLE ON-BOARD VIDEO

Please read the information below carefully.

I. IMPORTANT NOTES:

1. It is your responsibility to install and setup the new video card.

2. If the operating system does not have the appropriate video drivers

for your new video card you will have to contact the maker of the video

card for operating system compatible drivers.

II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)

BEFORE installing the video card, check your BIOS version and upgrade to

the latest BIOS version if applicable.

1. Click Start, point to Programs, point to MEDI-Kit and click MEDI-Kit

Interface.

2. Under DMI Compliant Component, click Intel PC System Description.

3. Click the System BIOS tab.

4. Check next to version for the BIOS version. The BIOS version will

look like 1.00.XX.DD04. The XX is the version number. Hence, if the

version is listed as 1.00.04.DD04, then the BIOS is version 04.

NOTE: As of 2/16/99, the latest BIOS update for PCV 70 90 is version

10.

5. Go the Sony web site at:

http://www.ita.sel.sony.com/support/pc/

6. Click Software Updates.

7. Read and accept the License Agreement.

8. Click the link for PCV 70, PCV 90.

9. Scroll through the entries for BIOS Updates. Download the BIOS

update if it is newer than the one currently installed on your system.

10. Follow the instructions in the accompanying text file to download

and install the BIOS update.

III. DISABLE ON-BOARD VIDEO

Follow the instructions below to disable the on-board video. Steps are

available for both Windows 95 and Windows 98.

Windows 95:

1. Click Start, point to Settings, and click Control Panel.

2. Double-click the System icon.

3. Click the Device Manager tab.

4. Double-click the Display Adapters entry.

5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).

6. Click the Properties button.

7. Click to remove the checkmark from Original Configuration (Current).

8. Click OK to accept the change.

9. Click NO to NOT restart the system.

10. Follow the subprocedure below to change the video display to

Standard Display Adapter (VGA).

Subprocedure:

A. Click Start, point to Settings, and click Control Panel.

B. Double-click the Display icon.

C. Click the Settings tab.

D. Click the Change Display Type button.

E. Next to Adapter type, click the Change button.

F. Click to select Show All Devices.

G. At the top left, click to highlight Standard Display Types.

H. At the top right, click to highlight Standard Display Adapter (VGA).

I. At the Select Device box, click the OK button.

J. At the Change Display type box, click the Close button.

K. At the Display Properties box, click Close.

L. Click Yes to restart the system. let the system boot back up.

Continue to step 11.

11. Click Start, and click Shutdown.

12. Select Shutdown and click Yes.

13. Once the system is shutdown, unplug it. The new video graphics

card may now be physically installed.

The following instructions should be used to disable the ATI graphics

chip set models PCV 70 90 with Windows 98.

Windows 98:

1. Click Start, point to Settings, and click Control Panel.

2. Double-click the System icon.

3. Click the Device Manager tab.

4. Double-click the Display Adapters entry.

5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).

6. Click the Properties button.

7. Click the Settings tab.

8. Click the Factory Defaults button.

9. At Factory Defaults window, click OK.

10. At the Factory Defaults have been restored to defaults message,

click OK.

11. At the ATI mach64 PCI (macxw4) (DirectDraw) box, click OK.

12. At the System Settings Change prompt, click NO to NOT restart.

13. Follow the subprocedure below to change the video display to

Standard Display Adapter (VGA).

Subprocedure:

A. Click Start, point to Settings, and click Control Panel.

B. Double-click the Display icon.

C. Click the Settings tab.

D. Click the Change Display Type button.

E. Next to Adapter type, click the Change button.

F. Click to select Show All Devices.

G. At the top left, click to highlight Standard Display Types.

H. At the top right, click to highlight Standard Display Adapter (VGA).

I. At the Select Device box, click the OK button.

J. At the Change Display type box, click the Close button.

K. At the Display Properties box, click Close.

L. Click Yes to restart the system. Let the system boot back up.

Continue to step 14.

14. Click Start and click Shutdown.

15. Select Shutdown and click Yes.

16. Once the system is shutdown, unplug it. The new video graphics

card may now be physically installed.

Solution

Description:

How to install another video card (includes disabling the on-board

video)? PCV 70 90

Solution:

This solution is broken into three sections:

I. IMPORTANT NOTES (READ FIRST)

II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)

III. DISABLE ON-BOARD VIDEO

Please read the information below carefully.

I. IMPORTANT NOTES:

1. It is your responsibility to install and setup the new video card.

2. If the operating system does not have the appropriate video drivers

for your new video card you will have to contact the maker of the video

card for operating system compatible drivers.

II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)

BEFORE installing the video card, check your BIOS version and upgrade to

the latest BIOS version if applicable.

1. Click Start, point to Programs, point to MEDI-Kit and click MEDI-Kit

Interface.

2. Under DMI Compliant Component, click Intel PC System Description.

3. Click the System BIOS tab.

4. Check next to version for the BIOS version. The BIOS version will

look like 1.00.XX.DD04. The XX is the version number. Hence, if the

version is listed as 1.00.04.DD04, then the BIOS is version 04.

NOTE: As of 2/16/99, the latest BIOS update for PCV 70 90 is version

10.

5. Go the Sony web site at:

http://www.ita.sel.sony.com/support/pc/

6. Click Software Updates.

7. Read and accept the License Agreement.

8. Click the link for PCV 70, PCV 90.

9. Scroll through the entries for BIOS Updates. Download the BIOS

update if it is newer than the one currently installed on your system.

10. Follow the instructions in the accompanying text file to download

and install the BIOS update.

III. DISABLE ON-BOARD VIDEO

Follow the instructions below to disable the on-board video. Steps are

available for both Windows 95 and Windows 98.

Windows 95:

1. Click Start, point to Settings, and click Control Panel.

2. Double-click the System icon.

3. Click the Device Manager tab.

4. Double-click the Display Adapters entry.

5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).

6. Click the Properties button.

7. Click to remove the checkmark from Original Configuration (Current).

8. Click OK to accept the change.

9. Click NO to NOT restart the system.

10. Follow the subprocedure below to change the video display to

Standard Display Adapter (VGA).

Subprocedure:

A. Click Start, point to Settings, and click Control Panel.

B. Double-click the Display icon.

C. Click the Settings tab.

D. Click the Change Display Type button.

E. Next to Adapter type, click the Change button.

F. Click to select Show All Devices.

G. At the top left, click to highlight Standard Display Types.

H. At the top right, click to highlight Standard Display Adapter (VGA).

I. At the Select Device box, click the OK button.

J. At the Change Display type box, click the Close button.

K. At the Display Properties box, click Close.

L. Click Yes to restart the system. let the system boot back up.

Continue to step 11.

11. Click Start, and click Shutdown.

12. Select Shutdown and click Yes.

13. Once the system is shutdown, unplug it. The new video graphics

card may now be physically installed.

The following instructions should be used to disable the ATI graphics

chip set models PCV 70 90 with Windows 98.

Windows 98:

1. Click Start, point to Settings, and click Control Panel.

2. Double-click the System icon.

3. Click the Device Manager tab.

4. Double-click the Display Adapters entry.

5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).

6. Click the Properties button.

7. Click the Settings tab.

8. Click the Factory Defaults button.

9. At Factory Defaults window, click OK.

10. At the Factory Defaults have been restored to defaults message,

click OK.

11. At the ATI mach64 PCI (macxw4) (DirectDraw) box, click OK.

12. At the System Settings Change prompt, click NO to NOT restart.

13. Follow the subprocedure below to change the video display to

Standard Display Adapter (VGA).

Subprocedure:

A. Click Start, point to Settings, and click Control Panel.

B. Double-click the Display icon.

C. Click the Settings tab.

D. Click the Change Display Type button.

E. Next to Adapter type, click the Change button.

F. Click to select Show All Devices.

G. At the top left, click to highlight Standard Display Types.

H. At the top right, click to highlight Standard Display Adapter (VGA).

I. At the Select Device box, click the OK button.

J. At the Change Display type box, click the Close button.

K. At the Display Properties box, click Close.

L. Click Yes to restart the system. Let the system boot back up.

Continue to step 14.

14. Click Start and click Shutdown.

15. Select Shutdown and click Yes.

16. Once the system is shutdown, unplug it. The new video graphics

card may now be physically installed.

Solution

Description:

How to install another video card (includes disabling the on-board

video)? PCV 70 90

Solution:

This solution is broken into three sections:

I. IMPORTANT NOTES (READ FIRST)

II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)

III. DISABLE ON-BOARD VIDEO

Please read the information below carefully.

I. IMPORTANT NOTES:

1. It is your responsibility to install and setup the new video card.

2. If the operating system does not have the appropriate video drivers

for your new video card you will have to contact the maker of the video

card for operating system compatible drivers.

II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)

BEFORE installing the video card, check your BIOS version and upgrade to

the latest BIOS version if applicable.

1. Click Start, point to Programs, point to MEDI-Kit and click MEDI-Kit

Interface.

2. Under DMI Compliant Component, click Intel PC System Description.

3. Click the System BIOS tab.

4. Check next to version for the BIOS version. The BIOS version will

look like 1.00.XX.DD04. The XX is the version number. Hence, if the

version is listed as 1.00.04.DD04, then the BIOS is version 04.

NOTE: As of 2/16/99, the latest BIOS update for PCV 70 90 is version

10.

5. Go the Sony web site at:

http://www.ita.sel.sony.com/support/pc/

6. Click Software Updates.

7. Read and accept the License Agreement.

8. Click the link for PCV 70, PCV 90.

9. Scroll through the entries for BIOS Updates. Download the BIOS

update if it is newer than the one currently installed on your system.

10. Follow the instructions in the accompanying text file to download

and install the BIOS update.

III. DISABLE ON-BOARD VIDEO

Follow the instructions below to disable the on-board video. Steps are

available for both Windows 95 and Windows 98.

Windows 95:

1. Click Start, point to Settings, and click Control Panel.

2. Double-click the System icon.

3. Click the Device Manager tab.

4. Double-click the Display Adapters entry.

5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).

6. Click the Properties button.

7. Click to remove the checkmark from Original Configuration (Current).

8. Click OK to accept the change.

9. Click NO to NOT restart the system.

10. Follow the subprocedure below to change the video display to

Standard Display Adapter (VGA).

Subprocedure:

A. Click Start, point to Settings, and click Control Panel.

B. Double-click the Display icon.

C. Click the Settings tab.

D. Click the Change Display Type button.

E. Next to Adapter type, click the Change button.

F. Click to select Show All Devices.

G. At the top left, click to highlight Standard Display Types.

H. At the top right, click to highlight Standard Display Adapter (VGA).

I. At the Select Device box, click the OK button.

J. At the Change Display type box, click the Close button.

K. At the Display Properties box, click Close.

L. Click Yes to restart the system. let the system boot back up.

Continue to step 11.

11. Click Start, and click Shutdown.

12. Select Shutdown and click Yes.

13. Once the system is shutdown, unplug it. The new video graphics

card may now be physically installed.

The following instructions should be used to disable the ATI graphics

chip set models PCV 70 90 with Windows 98.

Windows 98:

1. Click Start, point to Settings, and click Control Panel.

2. Double-click the System icon.

3. Click the Device Manager tab.

4. Double-click the Display Adapters entry.

5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).

6. Click the Properties button.

7. Click the Settings tab.

8. Click the Factory Defaults button.

9. At Factory Defaults window, click OK.

10. At the Factory Defaults have been restored to defaults message,

click OK.

11. At the ATI mach64 PCI (macxw4) (DirectDraw) box, click OK.

12. At the System Settings Change prompt, click NO to NOT restart.

13. Follow the subprocedure below to change the video display to

Standard Display Adapter (VGA).

Subprocedure:

A. Click Start, point to Settings, and click Control Panel.

B. Double-click the Display icon.

C. Click the Settings tab.

D. Click the Change Display Type button.

E. Next to Adapter type, click the Change button.

F. Click to select Show All Devices.

G. At the top left, click to highlight Standard Display Types.

H. At the top right, click to highlight Standard Display Adapter (VGA).

I. At the Select Device box, click the OK button.

J. At the Change Display type box, click the Close button.

K. At the Display Properties box, click Close.

L. Click Yes to restart the system. Let the system boot back up.

Continue to step 14.

14. Click Start and click Shutdown.

15. Select Shutdown and click Yes.

16. Once the system is shutdown, unplug it. The new video graphics

card may now be physically installed.

Solution

Description:

How to install another video card (includes disabling the on-board

video)? PCV 70 90

Solution:

This solution is broken into three sections:

I. IMPORTANT NOTES (READ FIRST)

II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)

III. DISABLE ON-BOARD VIDEO

Please read the information below carefully.

I. IMPORTANT NOTES:

1. It is your responsibility to install and setup the new video card.

2. If the operating system does not have the appropriate video drivers

for your new video card you will have to contact the maker of the video

card for operating system compatible drivers.

II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)

BEFORE installing the video card, check your BIOS version and upgrade to

the latest BIOS version if applicable.

1. Click Start, point to Programs, point to MEDI-Kit and click MEDI-Kit

Interface.

2. Under DMI Compliant Component, click Intel PC System Description.

3. Click the System BIOS tab.

4. Check next to version for the BIOS version. The BIOS version will

look like 1.00.XX.DD04. The XX is the version number. Hence, if the

version is listed as 1.00.04.DD04, then the BIOS is version 04.

NOTE: As of 2/16/99, the latest BIOS update for PCV 70 90 is version

10.

5. Go the Sony web site at:

http://www.ita.sel.sony.com/support/pc/

6. Click Software Updates.

7. Read and accept the License Agreement.

8. Click the link for PCV 70, PCV 90.

9. Scroll through the entries for BIOS Updates. Download the BIOS

update if it is newer than the one currently installed on your system.

10. Follow the instructions in the accompanying text file to download

and install the BIOS update.

III. DISABLE ON-BOARD VIDEO

Follow the instructions below to disable the on-board video. Steps are

available for both Windows 95 and Windows 98.

Windows 95:

1. Click Start, point to Settings, and click Control Panel.

2. Double-click the System icon.

3. Click the Device Manager tab.

4. Double-click the Display Adapters entry.

5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).

6. Click the Properties button.

7. Click to remove the checkmark from Original Configuration (Current).

8. Click OK to accept the change.

9. Click NO to NOT restart the system.

10. Follow the subprocedure below to change the video display to

Standard Display Adapter (VGA).

Subprocedure:

A. Click Start, point to Settings, and click Control Panel.

B. Double-click the Display icon.

C. Click the Settings tab.

D. Click the Change Display Type button.

E. Next to Adapter type, click the Change button.

F. Click to select Show All Devices.

G. At the top left, click to highlight Standard Display Types.

H. At the top right, click to highlight Standard Display Adapter (VGA).

I. At the Select Device box, click the OK button.

J. At the Change Display type box, click the Close button.

K. At the Display Properties box, click Close.

L. Click Yes to restart the system. let the system boot back up.

Continue to step 11.

11. Click Start, and click Shutdown.

12. Select Shutdown and click Yes.

13. Once the system is shutdown, unplug it. The new video graphics

card may now be physically installed.

The following instructions should be used to disable the ATI graphics

chip set models PCV 70 90 with Windows 98.

Windows 98:

1. Click Start, point to Settings, and click Control Panel.

2. Double-click the System icon.

3. Click the Device Manager tab.

4. Double-click the Display Adapters entry.

5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).

6. Click the Properties button.

7. Click the Settings tab.

8. Click the Factory Defaults button.

9. At Factory Defaults window, click OK.

10. At the Factory Defaults have been restored to defaults message,

click OK.

11. At the ATI mach64 PCI (macxw4) (DirectDraw) box, click OK.

12. At the System Settings Change prompt, click NO to NOT restart.

13. Follow the subprocedure below to change the video display to

Standard Display Adapter (VGA).

Subprocedure:

A. Click Start, point to Settings, and click Control Panel.

B. Double-click the Display icon.

C. Click the Settings tab.

D. Click the Change Display Type button.

E. Next to Adapter type, click the Change button.

F. Click to select Show All Devices.

G. At the top left, click to highlight Standard Display Types.

H. At the top right, click to highlight Standard Display Adapter (VGA).

I. At the Select Device box, click the OK button.

J. At the Change Display type box, click the Close button.

K. At the Display Properties box, click Close.

L. Click Yes to restart the system. Let the system boot back up.

Continue to step 14.

14. Click Start and click Shutdown.

15. Select Shutdown and click Yes.

16. Once the system is shutdown, unplug it. The new video graphics

card may now be physically installed.

Solution

Description:

How to install another video card (includes disabling the on-board

video)? PCV 70 90

Solution:

This solution is broken into three sections:

I. IMPORTANT NOTES (READ FIRST)

II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)

III. DISABLE ON-BOARD VIDEO

Please read the information below carefully.

I. IMPORTANT NOTES:

1. It is your responsibility to install and setup the new video card.

2. If the operating system does not have the appropriate video drivers

for your new video card you will have to contact the maker of the video

card for operating system compatible drivers.

II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)

BEFORE installing the video card, check your BIOS version and upgrade to

the latest BIOS version if applicable.

1. Click Start, point to Programs, point to MEDI-Kit and click MEDI-Kit

Interface.

2. Under DMI Compliant Component, click Intel PC System Description.

3. Click the System BIOS tab.

4. Check next to version for the BIOS version. The BIOS version will

look like 1.00.XX.DD04. The XX is the version number. Hence, if the

version is listed as 1.00.04.DD04, then the BIOS is version 04.

NOTE: As of 2/16/99, the latest BIOS update for PCV 70 90 is version

10.

5. Go the Sony web site at:

http://www.ita.sel.sony.com/support/pc/

6. Click Software Updates.

7. Read and accept the License Agreement.

8. Click the link for PCV 70, PCV 90.

9. Scroll through the entries for BIOS Updates. Download the BIOS

update if it is newer than the one currently installed on your system.

10. Follow the instructions in the accompanying text file to download

and install the BIOS update.

III. DISABLE ON-BOARD VIDEO

Follow the instructions below to disable the on-board video. Steps are

available for both Windows 95 and Windows 98.

Windows 95:

1. Click Start, point to Settings, and click Control Panel.

2. Double-click the System icon.

3. Click the Device Manager tab.

4. Double-click the Display Adapters entry.

5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).

6. Click the Properties button.

7. Click to remove the checkmark from Original Configuration (Current).

8. Click OK to accept the change.

9. Click NO to NOT restart the system.

10. Follow the subprocedure below to change the video display to

Standard Display Adapter (VGA).

Subprocedure:

A. Click Start, point to Settings, and click Control Panel.

B. Double-click the Display icon.

C. Click the Settings tab.

D. Click the Change Display Type button.

E. Next to Adapter type, click the Change button.

F. Click to select Show All Devices.

G. At the top left, click to highlight Standard Display Types.

H. At the top right, click to highlight Standard Display Adapter (VGA).

I. At the Select Device box, click the OK button.

J. At the Change Display type box, click the Close button.

K. At the Display Properties box, click Close.

L. Click Yes to restart the system. let the system boot back up.

Continue to step 11.

11. Click Start, and click Shutdown.

12. Select Shutdown and click Yes.

13. Once the system is shutdown, unplug it. The new video graphics

card may now be physically installed.

The following instructions should be used to disable the ATI graphics

chip set models PCV 70 90 with Windows 98.

Windows 98:

1. Click Start, point to Settings, and click Control Panel.

2. Double-click the System icon.

3. Click the Device Manager tab.

4. Double-click the Display Adapters entry.

5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).

6. Click the Properties button.

7. Click the Settings tab.

8. Click the Factory Defaults button.

9. At Factory Defaults window, click OK.

10. At the Factory Defaults have been restored to defaults message,

click OK.

11. At the ATI mach64 PCI (macxw4) (DirectDraw) box, click OK.

12. At the System Settings Change prompt, click NO to NOT restart.

13. Follow the subprocedure below to change the video display to

Standard Display Adapter (VGA).

Subprocedure:

A. Click Start, point to Settings, and click Control Panel.

B. Double-click the Display icon.

C. Click the Settings tab.

D. Click the Change Display Type button.

E. Next to Adapter type, click the Change button.

F. Click to select Show All Devices.

G. At the top left, click to highlight Standard Display Types.

H. At the top right, click to highlight Standard Display Adapter (VGA).

I. At the Select Device box, click the OK button.

J. At the Change Display type box, click the Close button.

K. At the Display Properties box, click Close.

L. Click Yes to restart the system. Let the system boot back up.

Continue to step 14.

14. Click Start and click Shutdown.

15. Select Shutdown and click Yes.

16. Once the system is shutdown, unplug it. The new video graphics

card may now be physically installed.

Solution

Description:

How to install another video card (includes disabling the on-board

video)? PCV 70 90

Solution:

This solution is broken into three sections:

I. IMPORTANT NOTES (READ FIRST)

II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)

III. DISABLE ON-BOARD VIDEO

Please read the information below carefully.

I. IMPORTANT NOTES:

1. It is your responsibility to install and setup the new video card.

2. If the operating system does not have the appropriate video drivers

for your new video card you will have to contact the maker of the video

card for operating system compatible drivers.

II. CHECK BIOS VERSION (UPGRADE IF APPLICABLE)

BEFORE installing the video card, check your BIOS version and upgrade to

the latest BIOS version if applicable.

1. Click Start, point to Programs, point to MEDI-Kit and click MEDI-Kit

Interface.

2. Under DMI Compliant Component, click Intel PC System Description.

3. Click the System BIOS tab.

4. Check next to version for the BIOS version. The BIOS version will

look like 1.00.XX.DD04. The XX is the version number. Hence, if the

version is listed as 1.00.04.DD04, then the BIOS is version 04.

NOTE: As of 2/16/99, the latest BIOS update for PCV 70 90 is version

10.

5. Go the Sony web site at:

http://www.ita.sel.sony.com/support/pc/

6. Click Software Updates.

7. Read and accept the License Agreement.

8. Click the link for PCV 70, PCV 90.

9. Scroll through the entries for BIOS Updates. Download the BIOS

update if it is newer than the one currently installed on your system.

10. Follow the instructions in the accompanying text file to download

and install the BIOS update.

III. DISABLE ON-BOARD VIDEO

Follow the instructions below to disable the on-board video. Steps are

available for both Windows 95 and Windows 98.

Windows 95:

1. Click Start, point to Settings, and click Control Panel.

2. Double-click the System icon.

3. Click the Device Manager tab.

4. Double-click the Display Adapters entry.

5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).

6. Click the Properties button.

7. Click to remove the checkmark from Original Configuration (Current).

8. Click OK to accept the change.

9. Click NO to NOT restart the system.

10. Follow the subprocedure below to change the video display to

Standard Display Adapter (VGA).

Subprocedure:

A. Click Start, point to Settings, and click Control Panel.

B. Double-click the Display icon.

C. Click the Settings tab.

D. Click the Change Display Type button.

E. Next to Adapter type, click the Change button.

F. Click to select Show All Devices.

G. At the top left, click to highlight Standard Display Types.

H. At the top right, click to highlight Standard Display Adapter (VGA).

I. At the Select Device box, click the OK button.

J. At the Change Display type box, click the Close button.

K. At the Display Properties box, click Close.

L. Click Yes to restart the system. let the system boot back up.

Continue to step 11.

11. Click Start, and click Shutdown.

12. Select Shutdown and click Yes.

13. Once the system is shutdown, unplug it. The new video graphics

card may now be physically installed.

The following instructions should be used to disable the ATI graphics

chip set models PCV 70 90 with Windows 98.

Windows 98:

1. Click Start, point to Settings, and click Control Panel.

2. Double-click the System icon.

3. Click the Device Manager tab.

4. Double-click the Display Adapters entry.

5. Click to highlight ATI mach64 PCI (macxw4)(DirectDraw).

6. Click the Properties button.

7. Click the Settings tab.

8. Click the Factory Defaults button.

9. At Factory Defaults window, click OK.

10. At the Factory Defaults have been restored to defaults message,

click OK.

11. At the ATI mach64 PCI (macxw4) (DirectDraw) box, click OK.

12. At the System Settings Change prompt, click NO to NOT restart.

13. Follow the subprocedure below to change the video display to

Standard Display Adapter (VGA).

Subprocedure:

A. Click Start, point to Settings, and click Control Panel.

B. Double-click the Display icon.

C. Click the Settings tab.

D. Click the Change Display Type button.

E. Next to Adapter type, click the Change button.

F. Click to select Show All Devices.

G. At the top left, click to highlight Standard Display Types.

H. At the top right, click to highlight Standard Display Adapter (VGA).

I. At the Select Device box, click the OK button.

J. At the Change Display type box, click the Close button.

K. At the Display Properties box, click Close.

L. Click Yes to restart the system. Let the system boot back up.

Continue to step 14.

14. Click Start and click Shutdown.

15. Select Shutdown and click Yes.

16. Once the system is shutdown, unplug it. The new video graphics

card may now be physically installed.


Загрузить файл

Похожие страницы:

  1. Shroud Of Turin Essay Research Paper IntroductionMillions

    Реферат >> Остальные работы
    ... Essay, Research Paper Introduction:Millions of words have been written about the ... real body. The descriptions from the references gathered were ... In the 1350?s a Frenchman, named Geoffroi de Charny ... a scientific solution. Public interest in the Shroud rests ...
  2. Privacy And Information Technology Essay Research Paper

    Реферат >> Остальные работы
    Privacy And Information Technology Essay, Research Paper Geoffrey Graves MG3700 Mid Term Exam ... compared with toy descriptions after analysis of the item, and research of the toy?s advertisements ... , and new solutions. The less that is hidden, the more that is ...
  3. Internet Censorship Essay Research Paper

    Реферат >> Остальные работы
    ... Essay, Research Paper “Inevitably, being an uncontrolled system, means that the ... Gopher, WAIS, Archie, and Email. The ... the study. The research team surveyed 917,410 “sexually explicit pictures, descriptions ... the whole purpose of the scheme. The solution ...
  4. Universal Product Code Essay Research Paper Last

    Реферат >> Остальные работы
    Universal Product Code Essay, Research Paper Last year on ... that track which care giver gave what drug (Dash ... information the user requests–a simple description of the product or ... Good Questions: Cracking the Solution to the Supermarket. Independent 24 Jan ...
  5. Enviormentalism Essay Research Paper Evironmentalism The Next

    Реферат >> Остальные работы
    Enviormentalism Essay, Research Paper Evironmentalism: The Next Step Broad ... is the best and most obvious solution to the problem ... home." This description is taken from the Real Goods Solar ... of some garbage statistics from Geoffrey C. Saign’s well-researched ...

Хочу больше похожих работ...

Generated in 0.0029349327087402